Seat Belt Control Ecu: Installation

INSTALL SEAT BELT CONTROL ECU
1. Install the clearance warning ECU to the seat belt control ECU with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 1: Identifying Seat Belt Control ECU Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Temporarily install the nut A.
3. Insert loosely tightened nut A into the hole on the vehicle body (left side of the luggage compartment). Slide down the seat belt control ECU and the clearance warning ECU as a unit to temporarily install them.
4. Insert the 2 bolts into the holes on the vehicle body and fully tighten the 3 nuts in the order of B, A, and C.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 2: Identifying Nut A, B And C
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the connectors.
INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER LH
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
INSTALL ROPE HOOK
INSTALL NO. 2 ROOM LIGHT ASSEMBLY
INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER
INSTALL ROPE HOOK ASSEMBLY
INSTALL DECK SIDE TRIM BOX RH
INSTALL DECK SIDE TRIM BOX LH
INSTALL SPARE WHEEL COVER
INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER