LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460 >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> DTC B2311 Power Window Motor Malfunction >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. PERFORM ACTIVE TEST BY INTELLIGENT TESTER OR TECHSTREAM (POWER WINDOW) 
    1. Select the Active Test, use the intelligent tester or Techstream to generate a control command, and then check that the power window regulator motor UP/ DOWN.
      CAUTION: Be careful to avoid injuries as this test causes vehicle parts to move. During the ACTIVE TEST, the jam protection function does not operate.
      1. Intelligent tester

        D DOOR MOTOR: 

        INTELLIGENT TESTER D DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        P/W UP/DOWN Driver side power window UP/OFF (OFF)
        P/W UP/DOWN Driver side power window DOWN/OFF (OFF)

        P DOOR MOTOR: 

        INTELLIGENT TESTER P DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        P/W UP/DOWN Front passenger side power window UP/OFF (OFF)
        P/W UP/DOWN Front passenger side power window DOWN/OFF (OFF)

        RL DOOR MOTOR: 

        INTELLIGENT TESTER RL DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        P/W UP/DOWN Rear LH side power window UP/OFF (OFF)
        P/W UP/DOWN Rear LH side power window DOWN/OFF (OFF)

        RR DOOR MOTOR: 

        INTELLIGENT TESTER RR DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        P/W UP/DOWN Rear RH side power window UP/OFF (OFF)
        P/W UP/DOWN Rear RH side power window DOWN/OFF (OFF)
      2. Techstream

        D-Door Motor: 

        TECHSTREAM D-DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        Power Window Driver side power window UP/OFF (OFF)
        Power Window Driver side power window DOWN/OFF (OFF)

        P-Door Motor: 

        TECHSTREAM P-DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        Power Window Front passenger side power window UP/OFF (OFF)
        Power Window Front passenger side power window DOWN/OFF (OFF)

        RL-Door Motor: 

        TECHSTREAM RL-DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        Power Window Rear LH side power window UP/OFF (OFF)
        Power Window Rear LH side power window DOWN/OFF (OFF)

        RR-Door Motor: 

        TECHSTREAM RR-DOOR MOTOR SPECIFICATION

        Tester Display Test Part Control Range
        Power Window Rear RH side power window UP/OFF (OFF)
        Power Window Rear RH side power window DOWN/OFF (OFF)

        OK: Power window operates normally. 

        Result: 

        RESULT CHART

        Result Proceed to
        OK A
        NG (Front LH side power window) B
        NG (Front RH side power window) C
        NG (Rear LH side power window) D
        NG (Rear RH side power window) E

    B: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (See  REMOVAL   ) 

    C: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (See  REMOVAL   ) 

    D: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (See  REMOVAL   ) 

    E: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (See  REMOVAL   ) 

    A: GO TO NEXT STEP 

  2. PERFORM INITIALIZATION 
    1. Initialize the power window regulator motor (see INITIALIZATION  ).
    2. Check that the power window operates normally by opening and closing the window.

      OK: Power window operates normally. 

      Result: 

      RESULT CHART

      Result Proceed to
      OK A
      NG (Front LH side power window) B
      NG (Front RH side power window) C
      NG (Rear LH side power window) D
      NG (Rear RH side power window) E

    B: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (See  REMOVAL   ) 

    C: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (See  REMOVAL   ) 

    D: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (See  REMOVAL   ) 

    E: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (See  REMOVAL   ) 

    A: GO TO NEXT STEP 

  3. CHECK WHETHER PARTS HAVE BEEN INSTALLED CORRECTLY 
    1. Check that the power window components are installed correctly.

      OK: Power window components are installed correctly. 

      HINT:

      When the power window components are installed correctly, the problem has been caused by battery disconnection while the engine switch is on (IG) or the motor being overheated.

    NG: INSTALL PARTS CORRECTLY 

    OK: END