Camshaft Oil Control Valve: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  NOTE:
  - Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover subassembly).
  - Be careful that the O-ring is not cracked or jumped when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 1: Locating Camshaft Timing Oil Control Valve Assembly (For Bank 1)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  NOTE:
  - Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover subassembly).
  - Be careful that the O-ring is not cracked or jumped when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 2: Locating Camshaft Timing Oil Control Valve Assembly (For Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL AIR CLEANER INLET COVER (See INSTALLATION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
DRIVING TEST
1. After the engine is warmed up, perform the driving test. Then check that the oil control valve operates normally.