Procedure - With Consult-II
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2004 Nissan Xterra, 2004 Nissan Titan, 2004 Nissan Sentra, 2004 Nissan Quest, and 2004 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Perform accelerator pedal released position learning, see ACCELERATOR PEDAL RELEASED POSITION LEARNING .
- Perform throttle valve closed position learning, see THROTTLE VALVE CLOSED POSITION LEARNING .
- Start engine and warm to normal operating temperature.
- Check that all items listed under PREPARATION are in good order.
- Select "IDLE AIR VOL LEARN" in "WORK SUPPORT" mode.
- Touch "START" and wait 20 seconds.
- Ensure that "CMPLT" is displayed on CONSULT-II screen. If "CMPLT" is not displayed, idle air volume learning will not be carried out successfully. In this case, find the cause of the incident by referring to DIAGNOSTIC PROCEDURE .
- Rev up the engine 2 or 3 times and ensure that idle speed and ignition timing are within specifications, see Fig 1.