LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460 >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (IPDM E/R (Intelligent Power Distribution Module Engine Room)) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> CONSULT-II Function >> Consult-II Basic Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult-II Basic Operation

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, then turn ignition switch ON.
    Fig 1: Connecting Consult-II & Consult-II Converter To The Data Link Connector
    G03496449Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    Fig 2: Touch "Start (Nissan Based VHCL)" Display
    G03496450Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "IPDM E/R" on "SELECT SYSTEM" screen.
    • If "IPDM E/R" is not displayed, print "SELECT SYSTEM" screen, then refer to CAN COMMUNICATION .
    Fig 3: Touch IPDM E/R On Select System Screen Display
    G03496451Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Select "SELF-DIAG RESULTS" or "DATA MONITOR".
    Fig 4: Self-Diag Results Or Data Monitor Display
    G03496452Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals