With Consult-II

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Check the coolant level in the reservoir tank and radiator.

Fig 1: Checking Coolant Level
Courtesy of NISSAN MOTOR CO., U.S.A.

Allow engine to cool before checking coolant level.

If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to "DIAGNOSTIC PROCEDURE ".
Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to "DIAGNOSTIC PROCEDURE ".
Turn ignition switch ON.
Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-II.

Fig 2: CONSULT-II Active Test
Courtesy of NISSAN MOTOR CO., U.S.A.
If the results are NG, go to "DIAGNOSTIC PROCEDURE ".