Removal and Installation: BCM: Installation

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

NOTE:

When replacing BCM, it must be configured. Refer to "CONFIGURATION ".
When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to "NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS) ".
When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to "ID REGISTRATION PROCEDURE ".
When replacing BCM, register the remote keyless entry system keyfob ID codes. Refer to "ID CODE ENTRY PROCEDURE ".
When replacing BCM, perform adjustment procedure for the steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION ".