Inspection After Installation

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Check that the accelerator pedal moves smoothly within the specified ranges.
Adjustable accelerator pedal-total pedal applied stroke : 48.3 mm (1.90 in)

Adjustable accelerator pedal-total pedal adjustment travel: 73.2 mm (2.88 in)
Depress and release the accelerator pedal to check that it returns smoothly to the original released position.
Perform an electrical inspection of the accelerator pedal position sensor. Refer to DTC P2138 APP SENSOR in ENGINE CONTROL SYSTEM - Titan article.

CAUTION: When the harness connector of the accelerator pedal position sensor is disconnected, perform "Accelerator Pedal Released Position Learning" . Refer to ACCELERATOR PEDAL RELEASED POSITION LEARNING in BASIC DIAGNOSTIC PROCEDURES - TITAN article.