CONSULT-III Function: Function
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC TEST MODE CHART
| Diagnostic test mode | Function | ||
|---|---|---|---|
| Work Support | This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT-III unit. | ||
| Self-Diagnostic Result | Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly.(1) | ||
| Data Monitor | Input/Output data in the ECM can be read. | ||
| Active Test | Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ECMs and also shifts some parameters in a specified range. | ||
| DTC & SRT Confirmation | The status of system monitoring tests and the self-diagnosis status/results can be confirmed. | ||
| Function Test | This mode is used to inform customers when their vehicle requires periodic maintenance. | ||
| ECU Part Number | ECM part number can be read. | ||
|
|||