LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460 >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Accelerator Control System) >> Accelerator Control System >> Removal and Installation >> Non-Adjustable Pedal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Non-Adjustable Pedal

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator position sensor electrical connector.
  2. Remove the upper and lower accelerator pedal nuts.
  3. Remove the accelerator pedal assembly.
    CAUTION:
    • Do not disassemble the pedal assembly. Do not remove the accelerator pedal position sensor from the pedal bracket  .
    • Avoid damage from dropping the accelerator pedal assembly during handling. 
    • Keep the accelerator pedal assembly away from water. 
  4. Installation is in the reverse order of removal.
    • Check the accelerator pedal for smooth operation. There should be no binding or sticking when applying or releasing the accelerator pedal.
CAUTION: Whenever the harness connector of the accelerator pedal position sensor has been disconnected, perform the  ACCELERATOR PEDAL RELEASED POSITION LEARNING  .
scientia non olet · About LEMON Manuals