LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting >> Automatic Light Control Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Light Control Sensor: Installation

  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
    1. Attach the 2 claws and install the automatic control sensor.
      Fig 1: Identifying Claws And Automatic Light Control Sensor
      G04944993Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL DEFROSTER NOZZLE ASSEMBLY  (See REASSEMBLY )
  3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT  (See REASSEMBLY )
  4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT  (See REASSEMBLY )
  5. INSTALL INSTRUMENT PANEL SAFETY PAD  (See INSTALLATION )
  6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  8. INSTALL TIRE PRESSURE WARNING ECU  (See REASSEMBLY )
  9. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY  (See INSTALLATION )
  10. INSTALL NO. 1 SPEAKER HOLE COVER  (See INSTALLATION )
  11. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH)  (See INSTALLATION )
  12. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL  (See INSTALLATION )
  13. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH)  (See INSTALLATION )
  14. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL  (See INSTALLATION )
  15. INSTALL FRONT PILLAR GARNISH LH  (See INSTALLATION )
  16. INSTALL FRONT PILLAR GARNISH RH  (See INSTALLATION )
  17. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Navigation System)  (See INSTALLATION )
  18. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET (for DVD)  (See INSTALLATION )
  19. INSTALL DISPLAY AND NAVIGATION ASSEMBLY WITH BRACKET (for HDD)  (See INSTALLATION )
  20. INSTALL RADIO RECEIVER ASSEMBLY  (See INSTALLATION )
  21. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  (See INSTALLATION )
  22. INSTALL NO. 2 INSTRUMENT PANEL LOWER AIRBAG  (See INSTALLATION )
  23. INSTALL INSTRUMENT PANEL LOWER  (See INSTALLATION )
  24. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER  (See INSTALLATION )
  25. INSTALL NO. 2 INSTRUMENT CLUSTER  (See INSTALLATION )
  26. INSTALL INSTRUMENT SIDE PANEL RH  (See INSTALLATION )
  27. INSTALL NO. 1 INSTRUMENT PANEL LOWER AIRBAG  (See INSTALLATION )
  28. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD  (See INSTALLATION )
  29. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER  (See INSTALLATION )
  30. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING  (See INSTALLATION )
  31. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
  32. INSTALL COMBINATION METER ASSEMBLY  (See REMOVAL )
  33. INSTALL INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  34. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE  (See INSTALLATION )
  35. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)  (See INSTALLATION )
  36. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)  (See INSTALLATION )
  37. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  38. INSTALL STEERING PAD ASSEMBLY  (See INSTALLATION )
  39. INSTALL NO. 2 STEERING WHEEL COVER LOWER  (See INSTALLATION )
  40. INSTALL WITCH AND VOLUME CASE  (See INSTALLATION )
  41. INSTALL CONSOLE BOX ASSEMBLY  (See INSTALLATION )
  42. INSTALL CONSOLE COVER LOWER  (See INSTALLATION )
  43. INSTALL CONSOLE REAR END PANEL  (See INSTALLATION )
  44. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER  (See INSTALLATION )
  45. INSTALL REAR CONSOLE PANEL UPPER  (See INSTALLATION )
  46. INSTALL NO. 3 BOX PANEL  (See INSTALLATION )
  47. INSTALL SHIFT LEVER KNOB  (See INSTALLATION )
  48. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  49. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  50. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (see CUSTOMIZE PARAMETERS ).
  51. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  52. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
  53. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals