LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Cruise Control Main Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Installation

  1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY 
    1. Install the switch.
      Fig 1: Locating Switch
      G04951440Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 screws.
      Fig 2: Locating Screws
      G04951436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the connector and clamp.
      Fig 3: Locating Connector And Clamp
      G04951435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING PAD  (See INSTALLATION )
  3. INSTALL SWITCH AND VOLUME CASE  (See INSTALLATION )
  4. INSTALL NO. 2 STEERING WHEEL COVER LOWER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. REMOVE COWL TOP VENTILATOR LOUVER LH  (See INSTALLATION )
  7. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  8. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals