DTC Check / Clear
- CHECK DTC
- Connect the intelligent tester or Techstream to the DLC3.
- Turn the engine switch on (IG).
- Tune the tester on.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DTC INFO /
- Techstream - Select: All ECUs / (desired system) / Trouble Codes /
- Read the DTCs.
- CLEAR DTC
- Connect the intelligent tester or Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DTC INFO /
- Techstream - Select: All ECUs / (desired system) / Trouble Codes /
- Erase the DTCs.