Driving Support Ecu: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL DRIVING SUPPORT ECU 
   1. Install the ECU with the nut.
      NOTE:

      • Do not use an ECU which has been dropped or subjected to any strong shocks.
      • During the removal and installation, do not remove the drip-proof cover.
      • When a new ECU is installed, perform initialization.
      Fig 1: Identifying Driving Support ECU Connector Nut

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL DASH PANEL EXTENSION LH 
   1. Install the dash panel extension with the 2 nut and bolt.
   2. Connect the connector.
   3. Attach the clamp.
   Fig 2: Identifying Dash Panel Extension Nuts And Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL COWL SIDE TRIM BOARD LH  (See INSTALLATION )
4. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )