LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Object Recognition Ecu >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Object Recognition Ecu: Installation

  1. INSTALL OBJECT RECOGNITION ECU 
    1. Attach the 2 clips to install the ECU.
    2. Install the 2 bolts.

      Torque: 7.4 N*m (76 kgf*cm, 66 in.*lbf) 

    3. Connect the 2 connectors.
      NOTE: Do not use an ECU which has been dropped or subjected to any strong shocks.
      Fig 1: Identifying Object Recognition ECU Bolts
      G04951461Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH  (See INSTALLATION )
  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT  (See INSTALLATION )
  4. INSTALL ROPE HOOK  (See INSTALLATION )
  5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY  (See INSTALLATION )
  6. INSTALL REAR FLOOR FINISH PLATE  (See INSTALLATION )
  7. INSTALL DECK TRIM SIDE BOARD RH  (See INSTALLATION )
  8. INSTALL ROPE HOOK ASSEMBLY  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
  10. ADJUST OBJECT RECOGNITION CAMERA (See  ADJUSTMENT   ) 
scientia non olet · About LEMON Manuals