Steering Pad Switch: Installation

INSTALL STEERING PAD SWITCH ASSEMBLY
1. Install the switch with the 4 screws.
  
  Fig 1: Identifying Steering Pad Switch Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL SWITCH AND VOLUME CASE (See INSTALLATION )
INSTALL NO. 2 STEERING WHEEL COVER LOWER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
INSPECT STEERING PAD (See ON-VEHICLE INSPECTION )
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).