April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Axle Hub Bolt: Replacement

REMOVE FRONT WHEEL
DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH (See REMOVAL )
REMOVE FRONT DISC (See REMOVAL )
REMOVE FRONT AXLE LH HUB BOLT
1. Using SST, remove the front axle hub bolt.
  SST 09650-17011
  
  NOTE: Do not damage the threads of the hub bolts.
  
  Fig 1: Identifying Front Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Holding Hub, Turning Wheel Nut

G04944016

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL FRONT AXLE LH HUB BOLT
1. Install a washer and nut to a new bolt as shown in the illustration.
2. Using a screwdriver or an equivalent to hold the hub, turn the wheel nut to pull the hub bolt until the bottom surface of the hub bolt head touches the axle hub.
  NOTE:
  - Do not damage the threads of the hub bolts.
  - Install hub nuts to prevent damage to the hub bolts.
INSTALL FRONT DISC (See INSTALLATION )
CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH (See INSTALLATION )
INSTALL FRONT WHEEL
Torque: 140 N*m (1428 kgf*cm, 103 ft.*lbf)