Fuel Pressure Regulator: Disassembly

REMOVE FUEL SENDER GAUGE ASSEMBLY
1. Disconnect the fuel sender gauge connector from the fuel suction plate.
2. Press down on the sender gauge claw labeled A. Then slide the sender gauge upward.
  NOTE: Do not touch the sender plate's resistance plate area or the contact area.
  
  Fig 1: Removing Fuel Sender Gauge Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY
1. Disconnect the fuel pump connector from the fuel suction plate.
  
  Fig 2: Locating Fuel Pump Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using needle nose pliers, remove the E-ring.
3. Remove the fuel suction plate and spring from the sub-tank.
  
  Fig 3: Identifying E-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL FILTER
1. Disengage the 2 claws and remove the filter from the sub-tank.
  
  Fig 4: Removing Fuel Filter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE JET PUMP
1. Using a screwdriver with the tip taped, remove the jet pump from the sub-tank.
  
  Fig 5: Removing Jet Pump From Sub-Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the O-ring from the jet pump.
  
  Fig 6: Locating Jet Pump O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
1. Disconnect the fuel pump connector from the fuel pump.
  
  Fig 7: Locating Fuel Pump Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Detach the 2 claws of the fuel filter and remove the cap.
  
  Fig 8: Locating Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the fuel pressure regulator from the fuel filter.
4. Remove the 2 O-rings from the pressure regulator.
REMOVE BRACKET
1. Using a screwdriver with the tip taped, disengage the claw and remove the bracket.
  
  Fig 9: Removing Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002