INSPECT FUEL INJECTOR ASSEMBLY
NOTE:
This inspection aims at inspecting the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are a high-pressure type and cannot be inspected for fuel injection volume.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
FUEL INJECTOR ASSEMBLY
| Tester Connection |
Condition |
Specified Condition |
| 1-2 |
20°C (68°F) |
2.01 to 2.31 Ω |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the injector.