On-Vehicle Inspection
- INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
- Connect the Intelligent tester or Techstream to the DLC3.
- Start the engine and turn the tester ON.
- Start and warm up the engine.
- Idle the engine.
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / VVT EX B1 or VVT EX B2.
- Techstream - Select: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2)
- Check the engine speed while operating the Oil Control Valve (OCV) using the tester.
Specified condition
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLYTester Operation Specified Condition 0% Normal engine speed 30% Engine idles roughly If the result is not as specified, check the oil control valve, wirings and camshaft timing exhaust gear.
HINT:
- VVT EX B1: Command to activate exhaust side oil control valve of bank 1.
- VVT EX B2: Command to activate exhaust side oil control valve of bank 2.