Illumination Signal Check: Notes

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ILLUMINATION SIGNAL

Turn ignition switch ON.
Check voltage between display unit and ground.

DISPLAY UNIT TERMINALS VOLTAGE SPECIFICATION

Terminals			Lighting switch position
(+)		(-)
Connector	Terminal (Wire color)		1st or 2nd position	OFF
M93	4 (R/L)	Ground	Battery voltage	Approx. 3V or less

OK or NG

OK: Replace display unit. Refer to CENTER STACK ASSEMBLY .
NG: Check harness for open or short between display unit and IPDM E/R.

Fig 1: Checking Voltage Between Display Unit & Ground
Courtesy of NISSAN MOTOR CO., U.S.A.