Transfer Control Unit Terminals And Reference Value
WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Data are reference value and are measured between each terminal and ground.
TRANSFER CONTROL UNIT TERMINAL ITEM SPECIFICATION
| Terminal | Wire color | Item | Condition | Data (Approx.) |
|---|---|---|---|---|
| 25 | L/W | Ignition switch monitor | Ignition switch: ON | Battery voltage |
| Ignition switch: OFF | 0V | |||
| 27 | Y/R | Actuator motor power supply | Ignition switch: ON | Battery voltage |
| Ignition switch: OFF | 0V | |||
| 32 | B | Actuator motor ground | Always | 0V |
| 40 | Y | Transfer relay 2 | Ignition switch: ON | 0V |
| Ignition switch: OFF | Battery voltage |
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.