System Description: Function
WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- through 50A fusible link (letter f , located in the fuse and fusible link box)
- to BCM terminal 70, and
- through 10A fuse [No. 19, located in the fuse block (J/B)]
- to key switch and key lock solenoid terminal 3 (floor shift) or key switch terminal 3 (console shift).
With ignition switch in ON or START position, power is supplied
- through 10A fuse [No. 59, located in the fuse and relay box)
- to BCM terminal 38.
Ground is supplied
- to BCM terminal 67
- through body grounds M57, M61, and M79.
NOTE:
When ignition key warning chime, light warning chime, and seat belt warning chime are required at the same time, the priorities for each chime are the following.
- Light warning chime
- Ignition key warning chime
- Seat belt warning chime