Calibration Function Of Compass
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
The direction display is equipped with a calibration feature. If vehicle direction is not shown correctly, carry out initial correction.
- Press and hold the mode (N) switch for about 9 seconds. The display will read "C".
- Drive the vehicle slowly in a circle, in an open, safe place. The initial calibration is completed in about three turns.
NOTE:
In places where the terrestrial magnetism is extremely disturbed, the initial correction may start automatically.