Fail-Safe Mode: Notes
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
When the ignition switch is in the ON position, if any of the parts (indicated in the following chart) move more than the specified amount within a period "T1" when no "ON" input is sent from any of the switches (indicated in the following chart), or an output from the automatic drive positioner is not produced, an output malfunction is sensed. Motor operation will be suspended automatically, and all automatic operations will be ineffective. (In this case, the motor will not operate manually).
FAIL-SAFE MODE REFERENCE
| OPERATED PORTION | T1 |
|---|---|
| Seat sliding | Approx. 2.5 sec. |
| Seat reclining | Same as above |
| Seat lifting (Front) | Same as above |
| Seat lifting (Rear) | Same as above |
| Steering wheel | Same as above |