LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Seats) >> Automatic Drive Positioner >> Terminals and Reference Values for Automatic Drive Positioner Control Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminals and Reference Values for Automatic Drive Positioner Control Unit

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUES FOR AUTOMATIC DRIVE POSITIONER CONTROL UNIT

Terminal Wire Color Item Condition Voltage (V)
(Approx.)
1 Y/G Tilt switch signal UP UP operation 0
Other than above 5
2 LG/R Changeover switch signal RH RH position 0
Other than above 5
3 Y/B Mirror switch signal UP UP position 0
Other than above 5
4 V/W Mirror switch signal LEFT LEFT position 0
Other than above 5
5 R/B Mirror sensor signal RH VERTICAL Door mirror RH UP or DOWN operation Changes between 3.4 and 0.6
6 L/Y Mirror sensor signal LH VERTICAL Door mirror LH UP or DOWN operation Changes between 3.4 and 0.6
7 O/L Tilt sensor input Tilt position TOP 1
Tilt position BOTTOM 4
9 L/W Power seat memory switch 1 signal Memory switch 1 ON 0
Memory switch 1 OFF 5
10 R UART LINE (TX) - -
11 P/L Telescopic switch signal FORWARD FORWARD operation 0
Other than above 5
12 O Power seat memory switch indicator 1 signal Memory switch 1 ON 1
Memory switch 1 OFF Battery voltage
13 P Power seat memory switch indicator 2 signal Memory switch 2 ON 1
Memory switch 2 OFF Battery voltage
14 GR/R Mirror motor signal RH UP UP operation 1.7 - Battery voltage
Other than above 0
15 L/Y Mirror motor signal RH LEFT LEFT operation 1.7 - Battery voltage
Other than above 0
16 G/B Mirror motor signal LH DOWN DOWN operation 1.7 - Battery voltage
Other than above 0
Mirror motor signal LH RIGHT RIGHT operation 1.7 - Battery voltage
Other than above 0
17 LG/B Tilt switch signal DOWN DOWN operation 0
Other than above 5
18 L Changeover switch signal LH LH position 0
Other than above 5
19 L/B Mirror switch signal DOWN DOWN position 0
Other than above 5
20 BR/Y Mirror switch signal RIGHT RIGHT position 0
Other than above 5
21 L/W Mirror sensor signal RH HORIZONTAL Door mirror RH LEFT or RIGHT operation Changes between 3.4 and 0.6
22 G/R Mirror sensor signal LH HORIZONTAL Door mirror LH LEFT or RIGHT operation Changes between 3.4 and 0.6
23 R/Y Telescopic sensor input Telescopic position TOP 0.4
Telescopic position BOTTOM 4.6
24 R/B Power seat set switch signal Set switch ON 0
Set switch OFF 5
25 V Power seat memory switch 2 signal Memory switch 2 ON 0
Memory switch 2 OFF 5
26 R/W UART LINE (RX) - -
27 G/W Telescopic switch signal BACKWARD BACKWARD operation 0
Other than above 5
30 L/R Mirror motor signal RH DOWN DOWN operation 1.7 - Battery voltage
Other than above 0
Mirror motor signal RH RIGHT RIGHT operation 1.7 - Battery voltage
Other than above 0
31 V/R Mirror motor signal LH UP UP operation 1.7 - Battery voltage
Other than above 0
32 BR Mirror motor signal LH LEFT LEFT operation 1.7 - Battery voltage
Other than above 0
33 W/L Sensor power supply - 5
34 W Battery power supply (FUSE) - Battery voltage
35 G/Y Tilt motor signal UP UP operation Battery voltage
Other than above 0
36 R Telescopic motor signal FORWARD FORWARD operation Battery voltage
Other than above 0
39 W/R Battery power supply (PTC) - Battery voltage
40 B Ground - 0
41 Y/G Sensor ground - 0
42 G/W Tilt motor DOWN signal DOWN operation Battery voltage
Other than above 0
44 G Telescopic motor signal BACKWARD BACKWARD operation Battery voltage
Other than above 0
48 B Ground - 0