Terminals and Reference Values for Driver Seat Control Unit
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUES FOR DRIVER SEAT CONTROL UNIT
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 1 | W/B | UART LINE (RX) | - | - |
| 3 | L | CAN-H | - | - |
| 6 | B/W | Ignition switch (START) | Ignition switch (START position) | Battery voltage |
| 9 | R | Reclining sensor signal | ON (seat reclining motor operation) | |
| Other than above | 0 or 5 | |||
| 10 | BR | Rear lifting sensor signal | ON (rear end lifter motor operation) | |
| Other than above | 0 or 5 | |||
| 11 | GR/R | Sliding switch LH BACKWARD signal | ON (sliding switch LH BACKWARD operation) | 0 |
| Other than above | Battery voltage | |||
| 12 | P | Reclining switch LH BACKWARD signal | ON (reclining switch LH BACKWARD operation) | 0 |
| Other than above | Battery voltage | |||
| 13 | W | Front lifting switch DOWN signal | ON (front lifting switch DOWN operation) | 0 |
| Other than above | Battery voltage | |||
| 14 | GR | Rear lifting switch DOWN signal | ON (rear lifting switch DOWN operation) | 0 |
| Other than above | Battery voltage | |||
| 16 | B/Y | Power supply (ENCODER) | - | 5 |
| 17 | GR | UART LINE (TX) | - | - |
| 19 | P | CAN-L | - | - |
| 21 | BR/Y | CVT device [detention switch (key)] signal | CVT selector lever other than P position | 0 |
| CVT selector lever P position with ignition knob switch pushed | Battery voltage | |||
| 24 | B | Sliding sensor signal | ON (seat sliding motor operation) | |
| Other than above | 0 or 5 | |||
| 25 | L/Y | Front lifting sensor signal | ON (front end lifter motor operation) | |
| Other than above. | 0 or 5 | |||
| 26 | P/B | Sliding switch LH FORWARD signal | ON (sliding switch LH FORWARD operation) | 0 |
| Other than above | Battery voltage | |||
| 27 | W/R | Reclining switch LH FORWARD signal | ON (reclining switch LH FORWARD operation) | 0 |
| Other than above | Battery voltage | |||
| 28 | BR | Front lifting switch UP signal | ON (front lifting switch UP operation) | 0 |
| Other than above | Battery voltage | |||
| 29 | Y/R | Rear lifting switch UP signal | ON (rear lifting switch UP operation) | 0 |
| Other than above | Battery voltage | |||
| 31 | BR | Sensor ground | - | 0 |
| 32 | B | Ground | - | 0 |
| 33 | Y | Battery power supply | - | Battery voltage |
| 35 | G | Sliding motor LH FORWARD output signal | Sliding switch LH FORWARD operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 36 | G | Reclining motor LH FORWARD output signal | Reclining switch LH FORWARD operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 37 | Y/G | Front lifter motor DOWN output signal | Front lifting switch DOWN operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 38 | B/W | Rear lifter motor UP output signal | Rear lifting switch UP operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 39 | B | Rear lifter motor DOWN output signal | Rear lifting switch DOWN operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 40 | Y/R | Battery power supply | - | Battery voltage |
| 42 | Y/R | Sliding motor LH BACKWARD output signal | Sliding switch LH BACKWARD operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 44 | GR/R | Reclining motor LH BACKWARD output signal | Reclining switch LH BACKWARD operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 45 | GR | Front lifter motor UP output signal | Front lifting switch UP operation (motor operated) | Battery voltage |
| Other than above | 0 | |||
| 48 | B | Ground | - | 0 |