LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Body Control System) >> BCM (Body Control Module) >> BCM >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring the new BCM after installation. Refer to "CONFIGURATION ".
  1. Disconnect the negative battery cable.
  2. Remove the lower driver instrument panel. Refer to "LOWER DRIVER INSTRUMENT PANEL ".
  3. Remove the screws and release the BCM from the steering member.
    Fig 1: Identifying BCM
    G04918160Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Disconnect the harness connectors and remove the BCM.
scientia non olet · About LEMON Manuals