LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Body Control System) >> On-Vehicle Repair >> BCM (Body Control Module) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
  1. Remove the combination meter. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the BCM screws (A), and pull out the BCM (1).
  3. Disconnect the BCM connector and remove the BCM (1).
Fig 1: Identifying BCM Connector And BCM Screws
G04889452Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals