Removal and Installation: Removal

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery negative terminal.
Remove the IPDM E/R cover (1) while pressing the pawl (A) at the rear end of the IPDM E/R cover (1).

Fig 1: Identifying IPDM E/R Cover And Pawl
Courtesy of NISSAN MOTOR CO., U.S.A.
Disconnect the harness connectors from the IPDM E/R.

Fig 2: Identifying IPDM E/R Connectors
Courtesy of NISSAN MOTOR CO., U.S.A.
While depressing the tabs (A) remove the IPDM E/R (1) from the vehicle.

Fig 3: Identifying IPDM E/R

Courtesy of NISSAN MOTOR CO., U.S.A.