DTC Detection Logic
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
- If DTC B210C is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC ".DTC DETECTION LOGIC CHART
DTC No. Trouble diagnosis name DTC detecting condition Possible cause B210C START CONT RLY OFF IPDM E/R detects that the relay is stuck at ON position even if the following conditions are met for about 1 second. - Starter control relay ON/OFF signal from BCM
- Clutch interlock or shift park neutral position (PNP) switch input signal
- IPDM E/R