LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 640 (Security Control System) >> Component Diagnosis >> B210D Starter Relay >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B210D is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
  • If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to "DTC LOGIC ".
    DTC DETECTION LOGIC CHART

    DTC No. Trouble diagnosis name DTC detecting condition Possible cause
    B210D STARTER RELAY ON IPDM E/R detects that the relay is stuck at ON position even if the following conditions are met for about 1 second.
    • Starter control relay ON/OFF signal from BCM
    • Clutch interlock or shift park neutral position (PNP) switch input
    • IPDM E/R


NOTE:
  • If DTC B210E is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
  • If DTC B210E is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".
    DTC DETECTION LOGIC CHART

    DTC No. Trouble diagnosis name DTC detecting condition Possible cause
    B210E STARTER RELAY OFF IPDM E/R detects that the relay is stuck at ON position even if the following conditions are met for about 1 second.
    • Starter control relay ON/OFF signal from BCM
    • Clutch interlock or shift park neutral position (PNP) switch input
    • IPDM E/R