DTC Detection Logic
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC "
- If DTC B210F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC ".DTC DETECTION LOGIC CHART
DTC No. Trouble diagnosis name DTC detecting condition Possible cause B210F INTER LOCK/PNP SW ON IPDM E/R detects a mismatch between the signals below for 1 second or more. - Shift PNP switch input signal
- Shift position signal from BCM (CAN)
- Harness or connectors [Park/neutral position (PNP) switch circuit is open or shorted
- Park/neutral position (PNP) switch