Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT DEVICE

Turn ignition switch OFF.
Disconnect CVT device harness connector.

Check continuity between CVT device terminals as follows.

CONTINUITY REFERENCE CHART

CVT device (park position switch)		Condition		Continuity
Terminal		Condition		Continuity
8	9	CVT selector lever	P position	No
8	9	CVT selector lever	Other than above	Yes

Fig 1: Checking Continuity Between CVT Device Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: Inspection End.

NO: Replace CVT device. Refer to "REMOVAL AND INSTALLATION ".