DTC Detection Logic
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B2607 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC ".
- If DTC B2607 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC ".
DTC DETECTION LOGIC CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2607 |
STEERING LOCK RELAY |
BCM detects that there is a difference between the following statuses.
- BCM request for electronic steering column lock power supply (ON/OFF)
- IPDM E/R status of electronic steering column lock power supply (ON/OFF)
|
- Harness or connectors (electronic steering column lock power supply circuit is open or shorted)
- Steering lock relay (in IPDM E/R)
|