Component Function Check
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before performing the diagnosis, check that the following is normal.
- Battery saver output/power supply
- Step lamp bulbs
- CHECK STEP LAMP OPERATION
CONSULT-III
- Turn ignition switch ON.
- Select "STEP LAMP TEST" of BCM (INT LAMP) active test item.
- While operating the test item, check that step lamps turn ON/OFF.
ON: Step lamp ON
OFF: Step lamp OFF
Is the inspection result normal?
YES: Step lamp control circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".