Without CONSULT-II
WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON.
- Fully depress the accelerator pedal.
- Repeat the following procedure quickly for 50 times.
- Turn ignition switch to START position and immediately return to ON position.
- Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds until the MIL stops blinking and turned ON.
- Fully release the accelerator pedal.
- Crank engine and make sure that engine starts.