Fuel Pressure Release

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-III

Turn ignition switch ON.
Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-III.
Start engine.
After engine stalls, crank it 2 or 3 times to release all fuel pressure.
Turn ignition switch OFF.

Without CONSULT-III

Remove fuel pump fuse located in IPDM E/R.
Start engine.
After engine stalls, crank it 2 or 3 times to release all fuel pressure.
Turn ignition switch OFF.
Reinstall fuel pump fuse after servicing fuel system.

Fig 1: Identifying IPDM/ER, Fuel Pump Fuse And Washer Tank Cap
Courtesy of NISSAN MOTOR CO., U.S.A.