With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch ON.
Select "BRAKE SW1" in "DATA MONITOR" mode with CONSULT-II.
Check "BRAKE SW1" indication under the following conditions.
A/T models

Fig 1: Test Parameters
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Test Parameters
Courtesy of NISSAN MOTOR CO., U.S.A.

M/T models

Fig 3: CONSULT-II Display Screen
Courtesy of NISSAN MOTOR CO., U.S.A.