LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 777 (Engine Control System - Introduction) >> Function Diagnosis >> On Board Diagnostic (OBD) System >> Diagnosis Tool Function >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect "GST" to data link connector (1), which is located under LH dash panel near the hood lock release handle (2).
    Fig 1: Identifying Data Link Connector And Hood Lock Release Handle
    G05869703Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Enter the program according to instruction on the screen or in the operation manual.

    (*: Regarding GST screens in this section, sample screens are shown.)

    Fig 2: GST Sample Screens Display
    G05869704Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform each diagnostic mode according to each service procedure.

    For further information, see the GST Operation Manual of the tool maker. 

    Fig 3: Generic Scan Tool Screen Display - READINESS TESTS
    G05869705Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals