LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 778 (Engine Control System - Component Testing) >> ASCD Brake Switch >> Component Inspection (ASCD Brake Switch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (ASCD Brake Switch)

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ASCD BRAKE SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect ASCD brake switch harness connector.
    3. Check the continuity between ASCD brake switch terminals under the following conditions.
      CONTINUITY CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released. Existed
      Slightly depressed. Not existed
      Fig 1: Checking Continuity Between ASCD Brake Switch Terminals
      G05869967Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK ASCD BRAKE SWITCH-II
    1. Adjust ASCD brake switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between ASCD brake switch terminals under the following conditions.
      CONTINUITY CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released. Existed
      Slightly depressed. Not existed
      Fig 2: Checking Continuity Between ASCD Brake Switch Terminals
      G05869968Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace ASCD brake switch.

scientia non olet · About LEMON Manuals