Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUEL PUMP

Turn ignition switch OFF.
Disconnect "fuel level sensor unit and fuel pump" harness connector.

Check resistance between "fuel level sensor unit and fuel pump" terminals as per the following.

RESISTANCE REFERENCE

Terminals	Resistance
1 and 3	0.2 - 5.0 Ω [at 25°C (77°F)]

Fig 1: Checking Resistance Between Fuel Level Sensor Unit And Fuel Pump Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace "fuel level sensor unit and fuel pump"