LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Power Shoulder Belt Anchorage System >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester or Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values deciding whether a part is faulty or not.
    1. Warm up the engine.
    2. Turn the engine switch off.
    3. Conned the intelligent tester or Techstream to the DLC3.
    4. Turn the engine switch on (IG).
    5. Turn the tester on.
    6. Enter the following menus.
      1. Intelligent tester Select DIAGNOSIS / OBD / MOBD / (desired system) / DATA LIST / ALL /.
      2. Techstream - Select Body electrical / (desired system) / Data List /
    7. According to the display on tester, read the "Data List"
      1. Intelligent tester

        D-DOOR: 

        INTELLIGENT TESTER - D-DOOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        SEAT BELT ANCHOR UP Shoulder belt anchorage switch / OFF or ON ON: UP switch is pressed
        OFF: Switch is not pressed        		 -
        SEAT BELT ANCHOR DOWN Shoulder belt anchorage switch / OFF or ON ON: DOWN switch is pressed
        OFF: Switch is not pressed        		 -
        MEM M1 SW Driver side position memorized with M1 switch / MEM or NOT MEM MEM: Memorized
        NOT MEM: Not memorized        		 -
        MEM M2 SW Driver side position memorized with M2 switch / MEM or NOT MEM MEM: Memorized
        NOT MEM: Not memorized        		 -
        MEM M3 SW Driver side position memorized with M3 switch / MEM or NOT MEM MEM: Memorized NOT
        MEM: Not memorized        		 -

        P-DOOR: 

        INTELLIGENT TESTER - P-DOOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        SEAT BELT ANCHOR UP Shoulder belt anchorage Switch / OFF or ON ON: UP switch is pressed
        OFF: Switch is not pressed        		 -
        SEAT BELT ANCHOR DOWN Shoulder belt anchorage switch / OFF or ON ON: DOWN switch is pressed
        OFF: Switch is not pressed        		 -
      2. Techstream

        Driver door: 

        TECHSTREAM - DRIVER DOOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        Belt Anchor Switch UP Shoulder belt anchorage switch / OFF or ON ON: UP switch is pressed
        OFF: Switch is not pressed        		 -
        Belt Anchor Switch DOWN Shoulder belt anchorage switch / OFF or ON ON: DOWN switch is pressed
        OFF: Switch is not pressed        		 -
        Mirror Memory No. 1 Driver side position memorized with M1 switch / MEM or NOT MEM MEM: Memorized
        NOT MEM: Not memorized        		 -
        Mirror Memory No.2 Driver side position memorized with M2 switch / MEM or NOT MEM MEM: Memorized
        NOT MEM: Not memorized        		 -
        Mirror Memory No.3 Driver side position memorized with M3 switch / MEM or NOT MEM MEM: Memorized
        NOT MEM: Not memorized        		 -

        Passenger door: 

        TECHSTREAM - PASSENGER DOOR

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        Belt Anchor Switch UP Shoulder belt anchorage switch / OFF or ON ON: UP switch is pressed
        OFF: Switch is not pressed        		 -
        Belt Anchor Switch DOWN Shoulder belt anchorage switch / OFF or ON ON: DOWN switch is pressed
        OFF: Switch is not pressed        		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Using the intelligent tester or Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    NOTE: When a BODY NO.4 (rear junction block) related vehicle switch is ON, Active Test items related to the vehicle switch are prohibited (double operation prohibition). Check that the vehicle switches are OFF before performing Active Tests.
    1. Warm up the engine.
    2. Turn the engine switch off.
    3. Connect the intelligent tester or Techstream to the DLC3.
    4. Turn the engine switch on (IG).
    5. Turn the tester on.
    6. Enter the following menus.
      1. Intelligent tester Select DIAGNOSIS / OBD / MOBD / (desired system) / ACTIVE TEST / ALL /.
      2. Techstream - Select Body Electrical / (desired system) / Active Test /
    7. According to the display on tester, perform the "Active Test"
      1. Intelligent tester

        REAR JUNCTION BLOCK: 

        INTELLIGENT TESTER - REAR JUNCTION BLOCK

        Tester Display Test Part Control Range
        DRIVER SIDE SEAT BELT ANCHOR MOTOR Seat belt anchor DOWN or UP
        PASSENGER SIDE SEAT BELT ANCHOR MOTOR Seat belt anchor DOWN or UP
      2. Techstream

        Body No.4: 

        TECHSTREAM - BODY NO.4

        Tester Display Test Part Control Range
        Driver Side Seat Belt Anchor Motor Seat belt anchor DOWN or UP
        Passenger Side Seat Belt Anchor Motor Seat belt anchor DOWN or UP
scientia non olet · About LEMON Manuals