LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LX 470 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition (2UZ-FE) >> VVT Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. DRAIN ENGINE COOLANT (See  REPLACEMENT  ) 
  3. REMOVE INTAKE MANIFOLD ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE VVT SENSOR (for Bank 1) 
    1. Disconnect the connector.
    2. Remove the bolt and sensor.
  5. REMOVE VVT SENSOR (for Bank 2) 
    1. Disconnect the connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals