LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LX 470 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> Register Transmitter ID
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Register Transmitter ID

  1. Set the tire pressure of all wheels to pressure specified on the tire and loading information label.
  2. Connect the Toyota scan tool to DLC3 (located under steering column).
  3. With the vehicle stopped and parking brake applied, turn the engine switch on (IG).
  4. Read and record the transmitter IDs (ID1 to ID4) by using the DATA LIST. See Fig 1 and Fig 2 .
  5. Select the "REGIST TIRE" mode.
    NOTE: The registered IDs in the memories will be deleted when performing the registration.
    NOTE: If the system is in the initialization mode, it is unable to perform registration. Therefore, restart the registration after terminating the initialization or confirming that the initialization has been completed.
  6. Select the "MAIN" registration mode (or select "2nd" when registering in 2nd).
  7. Input the transmitter IDs (ID1 to ID4) using the Toyota scan tool and transmit it to the tire pressure monitor ECU.
  8. Set the ID transmission condition to "SUCCEEDED".
    NOTE: If steps  4- 8 are not completed within 5 minutes, system will return to the normal operation mode.
Fig 1: Registering Transmitter ID Using Intelligent Tester (1 Of 2)
G00251660Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Registering Transmitter ID Using Intelligent Tester (2 Of 2)
G00251661Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals