Front Seat Inner Belt Assembly: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY 
   1. Install the seat belt with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   2. Install the seat belt's wire harness clamp.
   3. Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
3. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.