Floor Shift Assembly: Installation

INSTALL FLOOR SHIFT LEVER ASSEMBLY
1. Install the floor shift lever assembly with the 6 bolts.
  Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)
2. Connect the connector to the floor shift lever assembly.
  
  Fig 1: Locating Floor Shift Lever Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
1. Shift into the N position.
2. Connect the No. 1 floor shift gear shifting rod and connecting rod swivel with the nut.
  Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf)
INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER
1. Install console panel sub-assembly upper (see INSTALLATION ).
  
  Fig 2: Locating Floor Shift Gear Shifting Rod Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY