Connecting Rod, Engine

Connecting rod
Connecting rod thrust clearance
Standard 0.15 to 0.40 mm (0.0059 to 0.0157 in.)
Maximum 0.50 mm (0.020 in.)
Connecting rod out-of alignment
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Connecting rod twist
Maximum 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)
Connecting rod bolt diameter
Standard 7.2 to 7.3 mm (0.283 to 0.287 in.)
Maximum 7.0 mm (0.276 in.)
Connecting rod bushing inside diameter 22.005 to 22.014 mm (0.8663 to 0.8667 in.)
Oil clearance
Standard 0.005 to 0.011 mm (0.0002 to 0.0004 in.)
Maximum 0.03 mm (0.0012 in.)

CONNECTING ROD CAP
1st 25 N*m (255 kgf*cm, 18 ft.*lbf)
2nd Turn 90°