LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 350 AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Engine Immobilizer >> Engine Immobilizer System >> DTC Check/Clear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the intelligent tester to the Controller Area Network Vehicle Interface Module (CAN VIM). Then connect the CAN VIM to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the tester on.
    4. Enter the following menu items: DIAGNOSIS / OBD/ MOBD / IMMOBILIZER / DTC INFO / CURRENT CODES.
    5. Check the DTC(s) and freeze frame data, and then write them down.
    6. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE TABLE  ).
  2. CLEAR DTC 
    Fig 1: Connecting Cable Of Intelligent Tester (With CAN VIM) To DLC3
    G05202415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the tester on.
    4. Enter the following menu items: DIAGNOSIS / OBD/ MOBD / IMMOBILIZER / DTC INFO / CLEAR CODES.
    5. Press the YES button.
scientia non olet · About LEMON Manuals