LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 350 AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/Window Glass >> Power Window Regulator Motor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Regulator Motor: Inspection

  1. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT RH) 
    1. Remove the power window regulator motor.
      Fig 1: Checking Power Window Regulator Motor Operation (Front RH)
      G05006580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates clockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates counterclockwise
  2. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT LH) 
    1. Remove the power window regulator motor.
      Fig 2: Checking Operation Of Power Window Motor (FRONT LH)
      G05006578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates counterclockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates clockwise
  3. INSPECT POWER WINDOW REGULATOR MOTOR (REAR RH) 
    1. Remove the power window regulator motor.
      Fig 3: Identifying Power Window Regulator Motor Operation (Rear RH)
      G05006580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates clockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates counterclockwise
  4. INSPECT POWER WINDOW REGULATOR MOTOR (REAR LH) 
    1. Remove the power window regulator motor.
      Fig 4: Checking Power Window Regulator Motor Operation (Rear LH)
      G05006578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the motor connector according to the table below.
      NOTE: Do not apply battery to any terminals except terminals 1 and 2.

      Standard 

      VOLTAGE SPECIFICATION TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (D)
      Battery negative (-) → Terminal 2 (U)      		 Motor gear rotates counterclockwise
      Battery positive (+) → Terminal 2 (U)
      Battery negative (-) → Terminal 1 (D)      		 Motor gear rotates clockwise
scientia non olet · About LEMON Manuals